You are here:products|battery powered crimping tools|EZ-300 portable Battery Operated terminal lug Crimping Tools

EZ-300 portable Battery Operated terminal lug Crimping Tools

Rate this item
(1 Vote)

crimping range:16-300mm square

EZ-300 portable Battery Operated terminal lug Crimping Tools feature as below:

Crimping force:60KN

Stroke:              17mm

Crimping per charge:320 crimps (150 mm2 Cu cable)

Crimping cycle:3s-6s(depend on the size)

Battery voltage:18v Battery capacity:3.0Ah

Charging time:  2-2.5hs

Package:           steel case

Accessories: 16,,50,70,95,120,150,185,240,300mm2

Note: 2 Battery, 1 Charger, 2 set O-ring for oil vat and safety valve

EZ-300 Battery Operated Crimping Tools has the following advantange.

 

EZ series Battery-Powered Hydraulic Tools powered by 18V Lithium-Ion Batteries offering 50% higher capacity, with Crimping,Cutting
and Punching multi-function.
1.       The hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum
operating pressure is reached.
2.       A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is
equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.
3.       The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector
and a slow crimping motion.
4.       The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight
corners and other difficult working areas.
5.       Li-ion batteries do neither a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to
operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NIMH
batteries.
6.       A temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working,
the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal

EZ series Battery-Powered Hydraulic Tools powered by 18V Lithium-Ion Batteries offering 50% higher capacity, with Crimping,Cutting and Punching multi-function.

1.       The hydraulic unit incorporates and automatic retraction which returns the piston into its starting position when the maximum 
operating pressure is reached. 

2.     A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is 
equipped with a special brake when stops the forward motion of the piston & die when the trigger is released.

3.     The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector 
and a slow crimping motion.

4.    The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight 
corners and other difficult working areas.

5.    Li-ion batteries do neither a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to 
operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NIMH 
batteries.

6.       A temperature sensor makes the tool stop working automatically when the temperature over 60 degree under long time working, 
the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal

 battery powered crimper ez-300

EZ-300 portable Battery Operated terminal lug Crimping Tools

6-Ton Battery-Powered Crimping Tool can be operated with one hand while yielding 6 tons of output force. This 6.4 lb tool is suited for crimping service entry connectors and lugs as well as splicing up to 300 kcmil copper or 4/0 AWG aluminum wire

 

Product Details