Automatic rebar tying tools battery operated rebar tier machine replace MAX rebar tier

Rate this item
(0 votes)
Automatic rebar tying tools battery operated rebar tier machine replace MAX rebar tier

Automatic rebar tying tools or (rebar tying machine) Ni-Mh battery operated rebar tier machine tools

Features

* Quick tying ability ,each tie takes less than one-second 

* About 5 times faster than manual tying

* One hand operation, speeds setup time

* Reduces risk of health problem

* Light learn to operate in just minutes

bl220-type rebar tying machine main performance parameters are as follows:

the whole weight of 2.15Kg.

Maximum bundle diameter of 21mm,

the motor voltage is 9.6V  

nickel metal hydride batteries. A knot head, tied for about 0.8 seconds, the use of wire length of about 380mm (2 周) / 510mm (3 weeks),

a rechargeable battery can play more than 700 knots. Battery charging time is about 50 minutes. Ligation wire bundle diameter of 0.8mm, about 100 meters.

BLF-400-type strapping main performance parameters are as follows: the whole weight of 2.2Kg. Maximum bundle diameter of 40mm, the motor voltage is 9.6V nickel metal hydride batteries. A knot head, tied for about 0.9 seconds, the use of wire length of about 450mm (2 周) / 600mm (3 weeks), a rechargeable battery can play more than 700 knots. Battery charging time is about 50 minutes. Ligation wire bundle diameter of 0.8mm, about 100 meters.
Outside the box large box of size 653 * 413 * 425MM Weight 30kg / small box size 408 * 162 * 418MM Weight 7.5kg loaded a large box of 4 small boxes.

New  steel strapping, beautiful appearance and practical, is a handheld battery-class steel strapping tools quickly. It is an intelligent tool, built-in micro-controller chip can automatically complete all the steps in steel strapping, can be widely used in construction engineering, steel banding to replace the manual. Which is characterized by quick and easy, safe and reliable.

 

the accesory includes Wire coil

Material: Black annealed wire or galvanized wire
Length per spool: 100m
Diameter for wire: 0.8mm
Weight: 0.4KGS for spool
50pcs per box, weight for box:21KGS

Use with all the models of Cindelu rebar tier

Extension Arm Extension Bar

Extension Arm, makes  your work easier 
Stand-up extension arm for use with XDL-20, XDL-40.
Allows for stand-up operation.
Save your back and prevent injury!


automatic rebar tying machine Maintenance：
1.The custodian must make an everyday examination when the tool sending
out and taking back.The user must also make everyday examination before
operation.
2.Notice of everyday Examination:
a)
Check if crust and Grip is damaged.
b)
Confirm if the power plug is intact.
c)
Check if the power switch is normal and flexible,and if it is damaged.
d)
Confirm if the mechanism guard device is in good condition.
e)
Confirm if the winding section of tool is flexible,brisk and no blocking phenomenon.
3.The tool must be periodically examined with following instructions by 　specific staff:
a)
Examine once at least everyday.
b)
Shorten examination period when it is used in the area of wet and hot or diverse temperature environment.
4.Maintain promptly after using,wipe the plastic crust with soap-suds
cloth.Never use solvent to wipe because the solvents such as gasoline.
alcohol may mangle the plastic part.
5.When the tool not in use, it should be stored in a dry,clean or no
corrosion gas environment.
6.Please send to designated maintenance place if the tool is damaged.
Any damage performed by not specified staff is not three guarantees scope.

 

Product Details

Published in rebar tying tool
Social sharing

Related Video
back to top