Battery Crimping Tool 5118,battery powered crimping tool 5118

battery powered crimper Model EZ-400

Battery Powered Tool
Crimping force: 120KN
Stroke: 20mm
Crimp/charge: 150 times(Cu 150mm2)
Crimping cycle: 4-12s (depend on the size of cable)
Voltage: 18V
Capacity: 3.0Ah
Charging time: 2 hours
Package: Steel case.
ACCESSORIES:
Crimping dies 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300, 400mm2
Battery: 2 PCS
Charger: 1 PC
Sealing ring of cylinder: 1 set
Sealing ring of safety valve: 1 set

Ez-400 is a tool for crimping Cu/Ai lugs with c able from 16-400 mm2.itis powered by Li-ion, acutated by motor and controlled MCU, with  high pressure hydraulic system. It is a perfect tool to be used in electrical construction site.

 

It is capable of crimping connectors ranging in size from 16mm – 400mm in either copper or aluminium.Features include an automatic two speed hydraulic pump, and electronic variable speed control by the way of trigger pressure.Also, the piston can be released at any stage of the operation via an independent mechanical release trigger. For awkward angles the head of the unit can be rotated 180 degrees in order to reach close quarter situations.Once the correct crimp force has been reached there is an audible “click”, at which point the jaws will automatically retract for easy removal from the finished crimp. Further confirmation of correct crimp force is also featured on this unit by an indicator light, which will also keep the user informed as to the amount of battery life remaining.The pistol grip style of this unit enables single hand operation. The trigger is proected against accidental knocks by a handy trigger guard. There is also a facility to attach a handy shoulder strap which can be ordered separately or in our kit.

 

battery powered crimper Model EZ-400 Specification:

1.    On-site control: Control and Inspection; electronics with integrated pressure test provides an immediate error display without the use of additional equipment.

2.    Efficiency control: Multifunctional LED indicates maintenance and battery control.
3.    Automatic retraction stops (ARS) after completed crimping: stops at the correct position to secure further multiple parallel crimps of similar type.
4.    High performance 18 V Lithium-Ion Batteries offering 50% higher capacity.
5.    Power save function through motor stop feature (Automatic stop) once operation cycle is completed.
6.    Two stage hydraulics more powerful.

Description of components

 

Parts No.	Description	Function
1	Pin
2	Die
3	Retaining clips
4	Limited screw
5	Led indicator
6	Trigger
7	Retract button
8	Battery lock
9	Battery

battery powered crimper Model EZ-400 Operation instruction:

1.       charging

push battery into charger and connect the plug with the plug seat. make sure the room temperature is between 10-40c.The charging time is around 2 hours, Please see the illustration below.

2.       usage of the tool

 1).first you have to check the led indicator is right or not. If the indicator is light on the more than 5 seconds, It means no power of the battery and should change the full powered battery to settle on tool.

2)select the right dies of for the intended application.

3)A crimping process is initiated by switching the trigger. it is defined by the closing motion of the dies. The connection material is positioned in the stationary half the crimping dies and the moving part is. approaching the compression point

4)A crimping cycle is terminated when the dies contacted each other and when the maximum crimping force is reached. After the crimping cycle is completed the piston retracts automatically .afterwards a new crimping cycle can be initiated or the crimping process can be terminated by opening the latch and remove the connecting material out of the head.